Number of data bits 7 or 8 p4: Cleaning the Printhead Open the Front cover and back cover. Adjusting The Printhead Pressure Screws Disable the Self-test, please power off the printer at least 2 seconds, than power on again. Vertically place the two stands along the left side and right side of the back cover see Fig.
|Date Added:||13 March 2011|
|File Size:||40.52 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Maintenance and Adjustments Cutter We suggest that the minimum label height be more than 35 mm. To load a label roll onto the roll core part Setting up Your Printer Perform a Label Gap Sensor Adjustment as described on page The paper jam may cause the cutter work improperly, power off the printer.
Stripper Stripper Peeler helps you separate the printed label from the liner backing paper. In case of non heat-sensitive paper, a suitable thermal transfer ribbon must be used.
Release the feed button after the printer beeps 3 times. Disable the Self-test, please power off the printer fz-4tt least 2 seconds, than power on again.
If you need any help in installation and maintenance, please consult your supplier or dealer. Contents The contents comprise of the following: Setting Up Your Printer 2.
Use a soft cloth soaked with isopropyl alcohol to remove the stuck label and cleans the surface.
The strip bracket bar is used for strip function. Don’t have an account? Wait for about 3 seconds; the printer will print the following contents. Adjusting the Printhead Pressure Screws decrease pressure increase pressure When opening the front cover, you can see two screws on the top of the printhead assembly.
Godex EZ-4TT Manuals
Refer described on page 5. Put back the printhead and fasten it. Maintenance And Adjustments 3. With different paper material or ribbon material, you may need to adjust the printhead pressure by turning these two screws to decrease or increase the pressure.
Page of 17 Go. This manual also for: Got it, continue to print.
Enter text from picture: Load large label roll Open the front and back cover. Printing stops and LED turns Software setting or programming problem. Table of Contents Add to my manuals Add. Vertically place the two stands along the left side and right side of the back cover see Fig. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Cleaning the Printhead Open the Front cover and back cover. To print the manual completely, please, download it.
Godex EZ-4TT Plus User Manual
Comments to this Manuals Your Name. Turn over the head assembly. Press the printer lock part 14 to loosen the printhead assembly. Open the front cover and back cover.